Electrical characteristics
|
Nominal current (A)
(configurable connected load values)
|
16 or 32 single phase or 3-phase
The charging station is configurable in 1A steps
|
Line voltage (V AC)
|
230 / 400 (Europe)
|
Grid frequency (Hz)
|
50
|
Grid forms
|
TN / TT (single phase and 3-phase)
IT (only single phase) Other supply networks e.g. Splitphase (L1+L2, without N, 230V nominal)
|
EMV class
|
Emitted interference: Class B (residential, business, commercial areas) Immunity: residential, business, commercial and industrial areas
|
Overvoltage category
|
III as per EN 60664
|
Protection class
|
I
|
Necessary protective equipment
|
Residual current circuit breaker RCD type A and miniature circuit breakers must be
provided on the installation side
|
Integrated protective equipment
|
6 mA DC residual current protection
|
Phase rotation
|
Automatic false phase-sequence detection
|
Connections
|
Mounting
|
Wall and pole mounting (permanently connected)
|
Cable feed
|
Mounted on-wall or in-wall
|
Connection cross-section (wire dimension)
|
Cross-section of the connecting cable (Cu) taking into account
the local conditions and norms:
– rigid (min. – max.) 2,5 – 10 mm2;
– flexible (min. – max.) 2,5 – 10 mm2;
– flexible (min. – max.) with wire end ferrules: 2,5 – 10 mm2
|
Charging cable
|
Type 2 charging cable: up to 32 A / 400 VAC as per EN 62196-1 and EN 62196-2, Length: 4.5 m / 7 m
|
Output voltage (V AC)
|
230 / 400
|
Max. charging capacity (kW)
|
3.7 or 7.4 (1-phase operation)
11 or 22 (3-phase operation)
|
Communication & features
|
Authentication
|
– “Scan & Charge” via QR code
– Webasto ChargeConnect Portal
– Webasto ChargeConnect App
|
Display
|
RGB-LEDs, buzzer
|
Network interfaces
|
– LAN (RJ45) – 10 / 100 Base-TX
– WiFi 802.11b / g – 54 Mbit / s
– WiFi hotspot
|
Communication protocols
|
Modbus TCP, OCPP 1.6 J (OCPP 2.0 ready) with Webasto ChargeConnect
|
External interfaces
|
– Addressable via ripple control receiver through dry contacts
– Integration into Energy Management Systems (EMS)*
|
Local load management
|
Dynamic (stand-alone) by integration of an external smart meter**
|
Mechanical data
|
Dimensions (W × H × D) (mm)
|
225 x 447 x 116
|
Weight (kg)
|
11 kW: 4.6 (incl. 4.5 m cable)
5.3 (incl. 7 m cablel)
22 kW: 5.7 (incl. 4.5 m cable)
6.8 (incl. 7 m cable)
|
IP protection class, device
|
IP54
|
Protection against mechanical impact
|
IK08
|
Ambient conditions
|
Installation site
|
No direct solar radiation
|
Operating temperature range (°C)
|
11 kW: -30 to 55
22 kW: -30 to +45
|
Temperature behavior
|
A reduction in charging current or shutdown may occur in order
to prevent the charging station overheating.
|
Storage temperature range (°C)
|
-30 to +80
|
Permissible relative humidity (%)
|
5 to 95 non-condensing
|
Altitude (m)
|
Max. 3.000 above sea level
|
Certification compatibility
|
Standards and guidelines
|
– CE conformity
– 2014 / 53 / EU Radio Equipment Directive
– 2011 / 65/EU RoHS Directive
– 2001 / 95 / EG General Product Safety
– 2012 / 19 / EU Waste Electrical and Electronic Equipment Directive
– 1907 / 2006 REACH Regulation
|
Backend integration
|
Webasto ChargeConnect, 3rd party backend integration via Weabasto ChargeConnect in preparation
|